![](../bana6e.gif) |
|
|
|
![](k-e-003.gif) |
Microscopic image |
![](1-10.gif) |
|
|
In the nanoimprinting process, as shown below, a mold is pressed on the polymer, forming a microstructure. This technique can use either thermoplastic or photocuring resin. The purpose of this research is to use these techniques to fabricate high aspect ratio structures for optical elements. |
|
|
![](zu-01.gif) |
@Advantages of using this technique |
1j |
Integrated ultra-microscopic patterns can be efficiently printed. |
2j |
Lower equipment and maintenance costs. |
3j |
Expensive resists are not needed. |
4j |
Various cross-sectional forms can be formed. |
5j |
Development and dry etching are not needed, therefore it is safer for the environment. |
|
|
@Research details |
|
Analysis of resin properties and process optimization |
|
|
Advanced demolding process |
|
|
Theoretical analysis of molding process |
|
|
![](zu-02.gif) |
|
![](k-e-004.gif) |
|
|
|
Copyright 2004 (C) ATT'S corporationl all rights reserved. |